Rodeo S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
9. Clip and bolt
10. Clip and bolt
11. Clip and bolt
12. Clip and bolt
13. Front cable assembly
14. Nuts
15. Retainer
16. Rear cable
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following points.
>
Rear cable (16)
^
Apply grease (BESCO L-2 or equivalent) to the connecting portion of the rear cable and front cable assembly.
>
Nuts (14)
Specs:
Torque to 13 Nm (113 lb. in.)
>
Cable fixing bolt (8)
^
Tighten the cable fixing bolt to the specified torque.
Specs:
Torque to 6 Nm (52 lb. in.)
Applying Grease To Backing Plate Assembly
>
Shoe assembly (7)
^
After installation of the shoe and cable assembly, apply special grease (included in the (OEM) repair kit) to the positions indicated in the
figure.
Correct Installed Position Of Parking Brake Shoe Return Springs (Secondary On Outside)
>
Return spring; upper (5)