Rodeo S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
/Page-1794001.png)
Clutch Switch: Adjustments
1. Turn the clutch switch until the switch plunger is fully retracted against the clutch pedal arm.
2. Adjust clutch switch by backing it out half a turn and measure the clearance (delta) between the clutch pedal arm and the clutch switch.
3. Lock the lock nut.
4. Connect clutch switch connector.
Clutch switch (bolt) and clutch pedal
clearance mm (in) 0.5 - 1.5 (0.020 - 0.059)
