Rodeo S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
/Page-401001.png)
Rocker Arm Assembly: Service Precautions
CAUTION:
^
The pusher prevents air from entering the oil chamber. Its rod must always be facing upward.
^
Do not bend or twist the belt, otherwise its core could be damaged. The belt should not be bent at a radius less than 30 mm.
^
Do not allow oil or other chemical substances to come in contact with the belt. They will shorten the belt life.
^
Do not attempt to pry or stretch the belt with a screwdriver or any other tool during installation.
^
Store timing belt in a cool and dark place. Never expose the belt to direct sunlight or heat.
^
Visually inspect the rocker arm and replace them if damage or abnormal wear is evident.
