Rodeo S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
/Page-435001.png)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Pulley
NOTE: Remove the negative battery cable.
REMOVAL
1. Air cleaner duct assembly
2. Radiator upper fan shroud
^
Remove from radiator.
3. Cooling fan assembly
^
Remove four nuts, then the cooling fan assembly.
4. Power steering pump drive belt
5. Air Conditioning compressor pump drive belt
6. Generator drive belt
7. Fan pulley assembly
8. Crankshaft pulley assembly
^
Use special tool J-8614-01, or equivalent to hold crankshaft pulley.
^
Remove center bolt, then the pulley.
INSTALLATION
1. Crankshaft pulley [8]
^
Use special tool J-8614-01, or equivalent to hold the crankshaft pulley.
^
Tighten center bolt to 167 Nm (123 ft. lbs.).
2. Fan pulley assembly [7]
^
Tighten fixing bolt to 22 Nm (16 ft. lbs.).
3. Generator drive belt [6]
^
Engage and adjust.
4. Air Conditioning compressor drive belt [5]
^
Engage and adjust.
5. Power steering pump drive belt [4]
^
Engage and adjust.
6. Cooling fan assembly [3]
^
Tighten nuts to 8 Nm (69 inch lbs.).
7. Radiator upper fan shroud [2]
8. Air cleaner duct assembly [1]
