Rodeo S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
/Page-441003.png)
1. Connecting-rod [11]
2. Piston [10]
3. Piston pin [9]
^
Apply a thin coat of engine oil to the piston pin.
Try to insert the piston pin into the piston pin hole with normal finger pressure.
NOTE:
^
When changing piston/connecting rod combinations, do not change the piston/piston pin combination.
^
Do not reuse the old piston pin.
^
Attach the piston to the connecting rod with the piston front mark and the connecting rod mark on the same side.
