Rodeo S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Intake Manifold: Service and Repair
Installation
1. Intake manifold [13]
-
Tighten bolts and nuts to:
-
Bolts 24 Nm (17 ft. lbs.)
-
Nuts 24 Nm (17 ft. lbs.)
2. Connectors [12]
-
Connect each connector.
3. Fuel hoses [11]
-
Connect the hoses securely and install bolts on the head cover.
4. Common chamber [10]
-
Tighten bolts and nuts to:
-
Bolts 24 Nm (17 ft. lbs.)
-
Nuts 24 Nm (17 ft. lbs.)
5. Brackets [9]
-
Tighten bolts to 21 Nm (15 ft. lbs.).
6. Exhaust gas recirculation valve assembly [8]
-
Tighten bolts to 9 Nm (78 inch lbs.).
7. Ventilating hose bracket [7]
-
Tighten bolts to 24 Nm (17 ft. lbs.).
8. Vacuum hoses [6]
-
Connect vacuum hoses on canister Electronic Vacuum Sensing Valve (EVSV) and positive crankcase ventilation hose, fuel pressure control
valve hose, shift on the fly hose.
9. Throttle body [5]
-
Tighten bolts to 22 Nm (16 ft. lbs.).
10. Connectors [4]
-
Connect each connector without fail.
11. Vacuum booster hose [3]
12. Accelerator Pedal cable [2]