Rodeo S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Control Lever Assembly: Description and Operation
The vehicle has been cable-control-type to control by cable the mode and temperature of the heater unit and the mode door for the air source of the
blower assembly.
The fan control is used control the amount of air sent out by the resistor at four levels from "LOW" to "HIGH".
Ventilation
Set "AIR SOURCE SELECT LEVER" to "FRESH" position and turn on the blower fan. Heating can be done in this lever position, sending in fresh air
from outside.
The blower fan also serves to deliver fresh outside air to the vehicle interior to assure adequate ventilation.
Air Selector Lever
The air selector lever allows you to direct heated air into the passenger compartment through different outlets.
1. Vent - In this position, air is discharged from the upper air outlet. Air quantity is controlled by the control lever.
2. Bi-Level - In this position, air flow is divided between the upper air outlets and the floor air outlets, with warmer air delivered to the floor outlets
than the air delivered to the upper air outlets.