Rodeo S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
/Page-256001.png)
Alignment: Service and Repair
Camber
MEANS OF ADJUSTMENT
The camber angle can be adjusted by means of the camber shims installed in position between the chassis frame and fulcrum pins.
-
Overall thickness of caster shim and camber shim shall be 10.8 mm (0.425 inch) or less.
-
Tighten the fulcrum pin bolt to the specified torque of 152 Nm (112 ft. lbs.).
Alignment Specifications
Camber Angle: 0° ± 30'.
King Pin Inclination: 12°30' ± 30'.
