isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Fuel Gauge Sender - Resistance Values Revised|Page 321 > < Door Switch|Testing and Inspection|Page 316
Page 1
background image

Fuel Gauge Sender: Technical Service Bulletins
Fuel Gauge Sender - Resistance Values Revised

BULLETIN NUMBER:
SB97-02-L006

ISSUE DATE:
NOVEMBER 1997

GROUP:
FUEL SYSTEM

1996-97 RODEO (UC) 3.2L V6 ENGINE FUEL GAUGE
SENDING UNIT INSPECTION
(Workshop Manual Revision)

AFFECTED VEHICLES

1996-97 Rodeo (UC) models equipped with 3.2L V6 engine.

SERVICE INFORMATION

The inspection procedure for the fuel gauge sending unit contained in Section 8 - Chassis Electrical of the following Workshop Manuals has been
revised.

Manual

Page No.

1996 Rodeo (UC)

8-236

(Publication No. UC00-
WSM-L0002-00

1997 Rodeo (UC)

8-236

(Publication No. UC097-
WSM-L01

The "F" (FULL) point resistance value shown in figure 8-273 has been changed from 17 +/- 0.8 ohms to 6.5 +/- 0.6 ohms. This change is in response to
introduction of a new type fuel gauge sending unit.

Fuel Gauge Sender - Resistance Values Revised|Page 321 > < Door Switch|Testing and Inspection|Page 316