Rodeo S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
-
Measure the length of brush.
Replace with a new one, if it is below the limit.
Brush holder
-
Check for continuity between brush holder (+) and base (-). Replace, if there is continuity (i.e., insulation is broken).
Magnetic switch
-
Continuity of shunt coil
Check for continuity between terminals S and M. Replace, if there is no continuity (i.e., coil is disconnected).
-
Continuity of series coil
Check for continuity between terminals S and M. Replace, if there is no continuity (i.e., coil is disconnected).