Rodeo S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
-
Continuity of contacts
With the plunger faced downward, push down the magnetic switch. In this state, check for continuity between terminals B and M. Replace, if
there is no continuity (i.e., contacts are faulty).
Pinion
-
Check if the pinion rotates smoothly in drive direction by hand, or if it is locked when it is rotated reversely. If not, replace the pinion.
Yoke assembly
-
Check a magnet inside the yoke.
Replace the yoke assembly if it is broken.
Ball bearing
-
Clamp the inner race of ball bearing with your finger, and check for sticking or play when rotating the outer race.
Replace, if abnormality is found.