Rodeo S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
/Page-1528003.png)
following.
^
Secure the module with one bolt to relieve weight on the connector wire.
^
Tighten bolts to 8 Nm (69 ft. lbs.) as shown in the figure.
^
Connect the yellow Sway SRS connector located under the steering column.
^
Connect the battery negative terminal cable.
^
Set ignition to "ON" while watching warning light. Light should flash 7 times and then go off.
