Rodeo Sport 2WD L4-2.2L (2002)
Roll Bar: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove the soft top assembly or resin top assembly.
-
Refer to Soft Top Assembly or Resin Top Assembly.
3. Remove the luggage side lid (2).
4. Remove the luggage side upper cover (3).
5. Remove the luggage side front cover (4).
6. Remove the canopy cover (1) (resin top model).
-
Remove the two fixing clips.
7. Remove the left and right quarter side moldings (Soft top model).
-
Remove the six bolts and six screws.
8. Remove the weatherstrip.
9. Remove the rear end floor trim cover.
-
Remove the five fixing screws.