Rodeo Sport 2WD L4-2.2L (2002)
3. Remove the screw while pulling the inside lever toward you and then remove the inside handle.
4. Remove the speaker grille (1).
-
Pull out the front side of the grille.
5. Remove the speaker assembly (2).
-
Remove the 4 screws and disconnect the speaker harness connector (3).
6. Remove the courtesy light lens.
7. Remove the 5 screws (1), (3) and pull out the door trim panel at the 6 clip (2) positions.
8. Remove the waterproof sheet.
-
Taking notice of the door harness, peel the waterproof sheet off the door panel carefully.
9. Raise the glass up to the uppermost position, and then remove the rear guide rail.