Rodeo Sport 2WD L4-2.2L (2002)
Brake Pedal Assy: Testing and Inspection
Checking Pedal Travel
Checking Pedal Travel
1. Pedal height must be measured after starting the engine and rowing it several times to apply vacuum to the vacuum booster fully.
Note: Pedal height must be 95 mm (3.7 inch) or more when about 50 kg (110.25 lb.) of stepping force is applied.
2. If the measured value is lower than the above range, air may still be present in the hydraulic system. Perform the bleeding procedure.
