Rodeo Sport 2WD L4-2.2L (2002)
Wheel Cylinder: Service and Repair
Removal and Installation
Removal
1. Remove brake linings (1).
2. Remove brake pipe (4).
^
Plug the opening in the line to prevent fluid loss and contamination.
3. Remove bolts (3) and wheel cylinder (2).
Installation
1. Install wheel cylinder (2) and tighten bolts (3) to the specified torque.
Torque: 10 Nm (8 ft. lbs.)
2. Install brake pipe (4) and tighten the nut to the specified torque.
Torque: 16 Nm (12 ft. lbs.)
3. Install brake linings (1).
^
Bleed brake system.
