Rodeo Sport 2WD L4-2.2L (2002)
3. Disconnect red clip from harness connector.
4. Remove harness connector.
5. Remove EHCU ASM.
6. Remove EHCU.
Installation
To install, follow the removal steps in the reverse order, noting the following points
Torque
Hydraulic unit fixing nuts: 22 Nm (16 ft. lbs.)
Ground cable: 14 Nm (10 ft. lbs.)
Brake pipe (joint bolts): 16 Nm (12 ft. lbs.)
^
After installing the hydraulic unit, bleed brakes completely.