Rodeo Sport 2WD L4-2.2L (2002)
6. Use offset box wrench (13 mm hex.) to compress the locking lugs on the cable, then remove the rear cable (9) from the Backing plate.
Installation
1. Install rear cable (9).
2. Install retainer (8).
3. Tighten nut (7) to the specified torque.
Torque: 41 Nm (30 ft. lbs.)
^
Adjust the parking brake.
4. Tighten nut (6) to the specified torque.
Torque: 15 Nm (11 ft. lbs.)
5. Tighten bolt (5) (4) (3) to the specified torque.
Torque: 6.5 Nm (57 inch lbs.)
6. Install rear drums (2) and wheels (1).