Rodeo Sport 2WD L4-2.2L (2002)
Exhaust Pipe: Service and Repair
Front Exhaust Pipe
Front Exhaust Pipe
Front Exhaust Pipe and Associated Parts
Removal
1. Disconnect battery ground cable.
2. Raise the vehicle and support with suitable safety stands.
3. Disconnect 02 sensor harness connector and remove front side 02 sensor (2), (5).
4. Remove front exhaust pipe mounting bracket fixing bolt (4) and bracket.
5. Remove front exhaust pipe fixing bolts.
6. Remove front exhaust pipe fixing four stud nuts (1) from exhaust manifold.
7. Remove front exhaust pipe assembly.
Installation
1. Install front exhaust pipe assembly and tighten four stud nuts (1) and two bolts (6) to the specified torque:
Torque:
Stud Nuts: 28 Nm (21 ft. lbs.)
Bolts (6): 43 Nm (32 ft. lbs.)
Bolts (4): 23 Nm (17 ft. lbs.)
2. Tighten 02 sensor and reconnect 02 sensor harness connector.
Torque: 55 Nm (41 ft. lbs.)