Rodeo Sport 2WD L4-2.2L (2002)
Fuel Pressure Release: Vehicle Damage Warnings
Fuel Pressure Relief Procedure
CAUTION:
-
To reduce the risk of fire and personal injury, it is necessary to relieve the fuel system pressure before servicing the fuel system components.
-
After relieving the fuel system pressure, a small amount of fuel may be released when servicing fuel lines or connections. Reduce the chance of
personal injury by covering the fuel line fitting with a shop towel before disconnecting the fittings. The towel will absorb any fuel that may leak
out. When the disconnect is completed, place the towel in an approved container.
1. Remove the fuel filler cap.
2. Remove the fuel pump relay from the underhood relay box.
3. Start the engine and allow it to stall.
4. Crank the engine for about 30 seconds.
5. Disconnect the negative battery cable.
