Rodeo Sport 2WD L4-2.2L (2002)
Engine Control Module: Service and Repair
Reprogramming the PCM
EEPROM Programming
Connect Tech 2 to the vehicle DLC and retrieve information from the PCM. Ensure that the following condition have been met:
-
Battery is fully charged.
-
The Ignition is in ON position.
-
Tech 2 cable is securely connected to DLC.
Download latest program and calibration from ITCS. Always use latest ITCS software to program PCM. Refer to Up-to-date ITCS user's guide.
Reconnect Tech 2 to the DLC and program PCM.
-
Make sure the ignition is recycled after information is retrieved.
-
Ensure the ignition is stay in ON position after programming is started.