Rodeo Sport 2WD L4-2.2L (2002)
7. Remove O-ring backup from fuel injector.
INSTALLATION PROCEDURE
1. Lubricate the new O-ring with engine oil.
2. Install the O-ring backup on the fuel injector.
3. Install new O-ring on the fuel injector.
4. Install all four injector on the fuel rail.
5. Use new injector retainer clip to retain the injector to the fuel rail.
6. Coat the end of the fuel injector with engine oil.
7. Install fuel rail assembly. Refer to Fuel Rail Installation Procedure.
