Rodeo Sport 2WD L4-2.2L (2002)
8. If removal of fuel injector is necessary. Refer to Fuel Injectors Removal Procedure.
INSTALLATION PROCEDURE
1. Install the fuel injectors if necessary. Refer to Fuel Injector Installation Procedure.
2. Install the fuel pressure regulator if necessary. Refer to Fuel Pressure Regulator Installation Procedure.
3. Place the fuel injector rail assembly on the manifold and insert the injectors into each port by pushing fuel rail.
4. Install two fuel rail retaining bolts. Tighten fuel rail retaining bolts to 19 N.m (14 lb ft).
5. Place wiring harness in its place and secure it with two nuts.
