Rodeo Sport 2WD L4-2.2L (2002)
-
Pull the nine carpet fixing clips at each from the backside of the seat back assembly.
5. Remove the four lower anchorage strikers.
-
Remove the two fixing bolts of each lower anchorage striker.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. Install the lower anchorage strikers with matching the inside of the tab and the trim edge of the body floor panel.
2. Tighten the lower anchorage striker fixing bolts to the specified torque.
Torque: 25 N.m (18 lb ft)
