Rodeo Sport 2WD L4-2.2L (2002)
Seat Belt: Service and Repair
Front Seat Belt (LWB)
Front Seat Belt And Associated Parts
Removal
1. Disconnect the battery ground cable.
2. Remove the sill plate (Front & Rear).
3. Remove the anchor cover and seat belt lower anchor bolt.
4. Remove the lower center pillar trim cover.
5. Remove the door seal finisher (Front & Rear).
6. Remove the upper center pillar trim cover.
7. Remove the seat belt upper anchor bolt.
8. Remove the retractor fixing bolt.
9. Remove the seat belt assembly.
10. Remove the adjustable shoulder anchor assembly.
-
Remove the two fixing bolts.
Installation
To install, follow the removal steps in the reverse order, noting the following points.
