Rodeo Sport 2WD L4-2.2L (2002)
Control Module: Service and Repair
Powertrain Control Module (PCM) (HEC)
Removal
1. Disconnect battery ground cable.
2. Remove lower cluster assembly, center console and front console.
3. Disconnect PCM wiring harness connectors from PCM.
4. Remove four retaining nuts and PCM with bracket from instrument panel stay.
5. Remove PCM from bracket.
Installation
1. Install two brackets to PCM.
2. Install PCM with bracket to instrument panel stay and four retaining nuts.
3. Connect PCM wiring harness connectors to PCM.
4. Install center console, front console, and lower cluster assembly.
5. Connect battery ground cable.