Rodeo Sport 2WD V6-3.2L (2001)
1. Disconnect the battery ground cable.
2. Remove the door mirror assembly.
3. Remove the regulator handle (1).
-
Pull the hook (2) out and remove the regulator handle.
4. Remove the power window switch (1).
-
Pry the power window switch out and disconnect the switch connector.
5. Remove the speaker cover.
6. Remove the front speaker.
-
Remove the front speaker fixing screws in order to disconnect the speaker connector.
7. Remove the inside handle fixing screw.
CAUTION: Do not apply excessive force on the inside handle link or damage may occur, which could make the inside handle difficult to
operate.