Rodeo Sport 2WD V6-3.2L (2001)
5. Remove the sunvisors.
-
Remove the fixing screws and pull out the sunvisor holder (1) to remove it.
6. Remove the sunroof finisher (With sunroof).
7. Remove the headlining.
-
Remove the headlining fixing clips.
Installation
To install, follow the removal steps in the reverse order, noting the following points.
1. Install the headlining so that the fixing clips will not come off.
2. To install the sunroof finisher (1), first fit it in at one place with the headlining (3) close to the sunroof frame (2), then install the entire finisher
tightly by hitting it with a plastic hammer, not allowing it to move up.
