Rodeo Sport 2WD V6-3.2L (2001)
15. Remove the upper quarter trim cover (1).
-
Pry the twelve clip positions (2) free from the body panel.
16. Remove the front pillar assist grip (1) (Front & Rear).
-
Open the both sides of the assist grip cover (2) and remove the fixing screws and the front pillar assist grip.
Installation
To install, follow the removal steps in the reverse order, noting the following point:
1. Tighten the seat belt anchor bolt to the specified torque.
Torque: 39 N.m (29 lb ft)
