Rodeo Sport 2WD V6-3.2L (2001)
3. Remove the spare tire support.
-
Remove the four bolts that are fixed to frame cross member.
4. Remove the spare tire hanger assembly.
-
Remove the two fixing bolts.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. Install the spare tire firmly.
2. Tighten the spare tire support fixing bolts to the specified torque.
Torque: 40 N.m (4.1 kg.m)
3. Tighten the spare tire hanger fixing bolts to the specified torque.
Torque: 19 N.m (1.9 kg.m)