Rodeo Sport 2WD V6-3.2L (2001)
Tailgate Lock Cylinder: Service and Repair
TAILGATE LOCK (SWB)
Tailgate Lock And Associated Parts
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the tailgate glass assembly and tailgate glasses stay.
-
Refer to Tailgate Glass (SWB) in Body Structure.
3. Remove the tailgate trim cover assembly.
-
Remove the two screws fixing the trim cover assembly and pull up the trim cover after detaching the clips from tailgate panel.
4. Remove the waterproof sheet.
-
Remove the waterproof sheet, taking special care so as not to break it.
5. Remove the key cylinder.
-
Disconnect the lock links.
-
Remove the key cylinder retaining clip with screw driver to remove the key cylinder.
6. Remove the hatchgate lock actuator assembly.
-
Disconnect the actuator harness connector.
-
Remove the two nuts holding hatchgate lock actuator assembly from inside.
7. Remove the outside handle.