Rodeo Sport 2WD V6-3.2L (2001)
-
Disconnect the lock link.
-
Remove the 2 bolts holding the outside handle from inside.
8. Remove the tailgate lock assembly.
-
Remove the 3 screws holding the lock assembly.
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following points:
1. Apply chassis grease to the lock assembly and striker moving surface.
2. Tighten the tailgate lock assembly fixing screws to the specified torque.
Torque: 7 N.m (61 lb.in)
3. Check that the tailgate lock operates correctly after installing it.