Rodeo Sport 2WD V6-3.2L (2001)
Clock: Service and Repair
DIGITAL CLOCK
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the dash side trim panel-LH (1). Refer to Instrument Panel Assembly in Body Structure.
3. Remove the lower cover assembly (2). Refer to Instrument Panel Assembly in Body Structure.
4. Remove the meter cluster assembly (4). Refer to Instrument Panel Assembly in Body Structure.
5. Remove the digital clock (3).
-
Remove the fixing screw.
-
Disconnect the connector.
INSTALLATION
To install, follow the removal steps in the reverse order.