Rodeo Sport 2WD V6-3.2L (2001)
Hose/Line HVAC: Service and Repair
Removal and Installation
Refrigerant Line And Associated Parts
REMOVAL
1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant.
-
Refer to Refrigerant Recovery.
3. Remove radiator grille.
4. Remove clip and clamp.
5. Disconnect liquid line (High-pressure pipe).
6. Disconnect suction line (Low-pressure pipe) using a back-up wrench.
7. Disconnect suction line (Low-pressure hose) using a back-up wrench.
8. Disconnect discharge line (High-pressure hose) using a back-up wrench.
-
Use a backup wrench when disconnecting and reconnecting the refrigerant lines.
-
When removing the refrigerant line connecting part, the connecting part should immediately be plugged or capped to prevent foreign matter
from being mixed into the line.
INSTALLATION