Rodeo Sport 2WD V6-3.2L (2001)
assembly. Push down the top flange of the fuel pump to install retainer.
22.
Install the fuel pump retainer with tool J-39765.
23.
Install fuel tube/quick connector.
24.
Raise the fuel tank and install the connectors.
25.
Install fuel tank and tighten five bolts and one nut to specified torque (68 Nm) (50lb ft.)
26.
Install the separator and tighten two bolts (10 Nm) (95lb in).
27.
Connect fuel filler hose and fuel vent hose and clip them firmly.
28.
Connect fuel feed hose and fuel return hose and clip them firmly.
29.
Lower the vehicle from the hoist.
30.
Tighten fuel filler cap with not less than 3 clicks.
31.
Connect the battery ground cable.
32.
Enter the radio mode settings and station presets, recorded earlier and reset the clock.
PARTS INFORMATION
WARRANTY CLAIM INFORMATION
Use the labor operation table as shown.
WARRANTY CLAIM SUBMISSION INFORMATION
For your convenience, please use the information shown when submitting your warranty claim.
