Rodeo Sport 2WD V6-3.2L (2001)
following the Applying the Campaign Label section in this bulletin. The campaign is completed for the vehicle.
b. If the inspection determines that either hose contains Lot Number 0707, then only the hose(s) with Lot Number 0707 should be replaced.
Follow the appropriate installation instructions to replace the affected hose.
5.
Slide Fuel Return Hose Clamps from hose connecting area.
NOTE:
Do not damage or discard the hose clamps. The clamps will be reused.
6.
Remove Fuel Return Hose from fuel lines (Figures 1, 5, and 6).
CAUTION:
Place a drain pan underneath Fuel Return Hose and wrap the hose with cloth. Fuel may splash during Fuel Return Hose removal. Use caution when
handling fuel.
7.
Transfer Fuel Return Hose Clamps from old Fuel Return Hose to new Fuel Return Hose.
8.
Install new Fuel Return Hose.
9.
If Fuel Return Hose is the only affected hose then skip to Step 26-29. Otherwise continue to Step 10.
FUEL HOSE KIT INSTALLATION
(Includes: High Pressure Hose and Low Pressure Hose)
