Rodeo Sport 2WD V6-3.2L (2001)
6. Disconnect fuel filler hose (5) and fuel vent hose (6) at the fuel filler neck.
7. Disconnect fuel filler hose (5), fuel breather hose and fuel evapo hose.
NOTE: Cover fuel hoses to prevent any dust entering.
8. Remove two bolts (4) and remove separator.
9. Remove the five fuel tank assembly fixing bolts (2) and one nut (3).
10. Let down the tank and disconnect the wiring connectors (9, 10).
11. Remove fuel tank assembly along with protectors.
Installation
1. Raise the fuel tank assembly (1) and install the connectors (9, 10).
2. Install fuel tank assembly along with protectors and tighten the five fixing bolts (2) and one nut (3) to the specified torque.
Torque: 68 N.m (50 lb ft)
3. Install the separator and tighten two bolts (4).
Torque: 10 N.m (95 lb in)
4. Connect fuel filler hose (5) and fuel vent hose and clip them firmly.
5. Connect fuel feed hose and fuel return hose, and clip them firmly.
6. Tighten fuel filler cap with not less than 3 clicks.
7. Connect battery ground cable.
