Rodeo Sport 2WD V6-3.2L (2001)
11. Remove the rear roof bracket (2) (Resin top model).
Remove the rear roof bracket cover (4) and remove rear roof bracket connecting with resin top (1) and rear roof trim cover (3) by removing four
fixing bolts.
12. Remove the rear roof trim cover.
13. Remove the assist grip.
14. Remove the door seal finisher.
15. Remove the quarter upper trim cover.
16. Remove the seat belt upper anchor bolt.
17. Remove the retractor fixing bolt.
18. Remove the seat belt assembly.
19. Remove the adjustable shoulder anchor assembly. Remove the two bolts.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
CAUTION: When changing the front seat belt, confirm the part No. and change the seat belt in same part No.
1. Tighten the adjustable shoulder anchor assembly and retractor fixing bolts to the specified torque.
Torque: 39 N.m (29 lb ft)
2. Tighten the seat belt anchor bolts to the specified torque.
Torque: 39 N.m (29 lb ft)