Rodeo Sport 2WD V6-3.2L (2001)
Power Mirror Switch: Description and Operation
CIRCUIT OPERATION
The two outside mirrors are controlled by the mirror control switch. Each mirror has two reversible motors: one motor moves the mirror up and down,
and the other motor moves the mirror left and right.
The mirror control switch has three switches to control mirror direction and two switches to select the left or right mirror. The mirror selector switch
directs voltage from the direction switches to either the left or the right mirror. Each direction switch is used for more than one function. With the starter
switch in ACC or ON, battery voltage is supplied to the mirror control switch.
Mirror Up Operation
With the mirror control switch in the up position, switch 1 is moved to the B position, Switch 2, in the A position, applies battery voltage to both the left
and right power mirror up/down motors. If the mirror selector switch is in the left position, the left up/down motor is grounded through switch 1 in the B
position to B-8. If the right mirror up/down motor is selected, it is also grounded through switch 1 in the B position.
Mirror Down Operation
With the mirror control switch in the down position, switch 2 is moved to the B position. Switch 1 in the A position applies battery voltage to the left or
right power mirror up/down motor as determined by the mirror selector switch. The selected mirror motor is grounded through switch 2 in the B position
to B-8.
Mirror Left Operation
With the mirror control switch in the left position, switch 2 is moved to the A position applying battery voltage to the left or right power mirror, up/down
and left/right motors as determined by the mirror selector switch. The selected mirror motor is grounded through switch 3 in the B position to B-8. With
switch 1 in the 0 position, the up/down motor is not grounded, so it does not operate.
Mirror Right Operation
With the mirror control switch in the right position, switch 2 is moved to the B position. Switch 3 in the A position applies battery voltage to the left or
right left/right motor. The motor is grounded through the mirror selector switch and switch 2 in the B position to B-8.
