Rodeo Sport 2WD V6-3.2L (2001)
16. Remove the window regulator.
-
Remove the window regulator fixing bolts and pull the regulator out from the lower hole of the door panel.
17. Remove the glass run.
-
Pull the glass run out from the door frame.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. Install the regulator handle as shown in the illustration, if equipped without power windows.
2. Check to see that the window regulator operates smoothly and the glass opens and closes properly.
3. Install the waterproof sheet tightly against the door panel.
