Rodeo Sport 2WD V6-3.2L (2001)
Wiper Switch: Service and Repair
Rear Wiper
REAR WIPER AND WASHER SWITCH
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the dash side trim panel (1).
3. Remove the lower cover assembly (2).
-
Refer to Instrument Panel Assembly in Body Structure.
4. Remove the meter cluster assembly (4).
5. Remove the rear wiper & washer switch (5).
-
Disconnect the connector.
-
Push the lock from the back side of the meter cluster assembly.
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following point:
1. Push the switch with your fingers until it locks securely.
