Rodeo Sport 2WD V6-3.2L (2001)
Windshield Washer Motor: Service and Repair
Front Washer
WINDSHIELD WASHER MOTOR
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the fender inner liner (right side).
3. Disconnect the windshield washer motor connector and the rear washer motor connector.
4. Disconnect the windshield washer hose connector and the rear washer hose connector.
5. Remove the filler neck (2).
-
Remove the bolt.
6. Remove the washer tank (1).
-
Remove the three nuts.
7. Pull the windshield washer motor (4) from the washer tank.
INSTALLATION
To install, follow the removal steps in the reverse order.