Rodeo Sport 4WD V6-3.2L (2002)
Power Door Lock Actuator: Service and Repair
Rear Door Lock Actuator
Removal
1. Disconnect the battery ground cable.
2. Remove the rear corner garnish.
-
Pull the corner garnish to disconnect the retaining clip.
3. Remove window regulator handle.
-
Remove the clip on the rear side of the regulator handle using a wire.
4. Remove the screw while pulling the inside lever toward you and then remove the inside handle.
5. Remove the screw at the pull case.
6. Pull out the trim panel at the 8 clip positions.
