Rodeo Sport 4WD V6-3.2L (2002)
Sun Shade: Service and Repair
Removal
1. Tilt the sun roof.
2. Disconnect the battery ground cable.
3. Remove the sun roof glass.
-
Refer to Sun Roof Glass.
4. Pull the sight shield upward using screwdriver.
5. Remove 2 sunshade stopper fixing screws and remove sunshade stopper (1).
6. Pull out the sunshade (4) up to the guide rail edge. Lift the front of sunshade and clear the projection (3) of sunshade through the notch (2) of
guide rail edge, then draw the sunshade out of the roof.
Installation
To install, follow the removal steps in the reverse order.