Rodeo Sport 4WD V6-3.2L (2002)
Brake Rotor/Disc: Testing and Inspection
Checking Lateral Runout
Front
Checking Lateral Runout
1. Adjust the wheel bearing correctly.
2. Attach a dial indicator accordingly so that the stem contacts the rotor surface to approximately 29 mm (1.14 inch) from the rotor edge.
3. Rotate the rotor one complete rotation and inspect for signs of lateral runout. Lateral runout should not exceed 0.13 mm (0.005 inch).
Maximum runout: 0.13 mm (0.005 inch)
Rear
Checking Lateral Runout
1. Adjust the wheel bearing correctly.
2. Attach a dial indicator accordingly so that the stem contacts the rotor surface to approximately 29 mm (1.14 inch) from the rotor edge.
3. Rotate the rotor one complete turn and inspect for signs of lateral runout. Lateral runout should not exceed 0.13 mm (0.005 inch).
Maximum runout: 0.13 mm (0.005 inch)