Rodeo Sport 4WD V6-3.2L (2002)
Drive Belt: Service and Repair
Drive Belt and Cooling Fan
Drive Belt and Associated Parts
The drive belt adjustment is not required as automatic drive belt tensioner is equipped.
Removal
Move the tension pulley drive belt loosen side, remove the drive belt.
Inspection
Check drive belt for wear or damage, and replace with a new one as necessary.
Installation
1. Install cooling fan assembly and tighten bolts/nuts to the specified torque.
Torque: 22 Nm (16 ft. lbs.) for fan pulley and fan bracket.
Torque: 7.5 Nm (66.4 inch lbs.) for fan and clutch assembly.
Note: Fan belts for 6VD1 Gasoline Engine mounted on 98 MY Rodeo (UK) have been brought into one. As a result, the rotating direction of a