Rodeo Sport 4WD V6-3.2L (2002)
Blower Motor: Service and Repair
Blower Assembly
Blower Assembly
Removal
1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant (with air conditioning).
-
Refer to Refrigerant Recovery in this section.
3. Remove instrument panel assembly.
-
Refer to Instrument Panel Assembly in Body and Accessories section.
4. Disconnect resistor connector.
5. Remove knee bolster bracket.
6. Remove duct.
7. Remove evaporator assembly (A/C only).
-
Refer to Evaporator Assembly in this section.
8. Disconnect blower motor connector.
9. Remove blower assembly.
Installation
To install, follow the removal steps in the reverse order.
