Rodeo Sport 4WD V6-3.2L (2002)
Control Assembly: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove instrument panel driver lower cover assembly.
3. Remove meter cluster assembly.
-
Refer to Instrument Panel Assembly in Body and Accessories section.
4. Remove glove box.
5. Remove the control lever attaching screws.
6. Pull the control lever assembly out and disconnect the fan switch and air conditioning switch connectors.
7. Remove control level assembly.
8. Disconnect control cables at each unit side.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
