isuzu Workshop Repair Guides

Isuzu Rodeo Sport 4WD V6-32L Workshop Service and Auto Repair Manuals

ABOUT US
Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 1435 > < Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 1433

Rodeo Sport 4WD V6-32L (2002) Manifold Pressure Sensor Location

Page 1
background image

Manifold Absolute Pressure Sensor: Service and Repair

Removal Procedure

1. Disconnect the negative battery cable.

2. Disconnect the electrical connector from the MAP sensor.
3. Remove the bolt securing the MAP sensor to the mounting bracket on the common chamber.

4. Remove the MAP sensor from the mounting bracket.

Installation Procedure

1. Install the MAP sensor in the mounting bracket.
2. Install the mounting bracket retaining bolt on the common chamber.

Tighten

Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 1435 > < Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 1433