Rodeo Sport 4WD V6-3.2L (2002)
6. Prepare four 15 inch or larger tires without wheel and two same size tires with wheels.
7. How to fix Driver air bag.
1. Attach the airbag securely, facing up on a tire/wheel assembly. Use a wire size of at least 1.3 mm (0.05 inch) and attach to at least two or
more points on the airbag assembly.
2. Connect SRS air bag assembly to the double pole extension cord of the air bag deployment harness. Do not connect the deployment harness to
a power source until air bag deployment. (If connected the SRS air bag assembly deploys immediately)
NOTE: Ensure that the pigtail adapter is firmly seated into the air bag assembly connector. Failure to fully seat the connectors may leave the
shorting bar located in the air bag assembly connector functioning (shorting the deployment circuit) and may result in non deployment of the
air bag assembly.
3. Follow the illustration and place the wheel with the airbag on the bottom facing up, then three tires and a tire with a rim on top. Bind the five
tires with a rope so that the tires may not collapse.
8. How to fix Passenger air bag.
